- Actuator
- Air Cleaner / Air Purifier
- Air Compressor Parts, Components and Accessories
- Air Cond Bracket
- Air Filter
- Air Purifier
- Air-Cond and Refrigeration Tooling
- Air-Conditioner Products
- Air-Curtain
- Anti-Clog
- Belting
- Best Seller
- BRAZED PLATE HEAT EXCHANGER (BPHE)
- Brazing Alloys and Fluxes
- Brazing Equipment and Accessories
- Chemical
- Cleaning Cover
- Coldroom Parts and Accessories
- Company Developments
- Compressor
- Condensate Drainage Pump
- Condensing Unit
- Cooling Tower And Spare Parts
- Copper and Fittings
- Copper Piping Leak Test
- Cotton Rags
- Dehumidifier
- Delivery Service
- Ducting, Diffuser and Accessories
- Electrical
- Exhaust and Ventilating Fan
- Export
- Fan Set
- Freezer
- Freezer Chiller (CDU)
- Hardware Items and Tools
- 3M
- ACE
- Alseal
- ANTON
- Apollo
- BERRYLION
- BINA
- China
- COSIMO
- COSTA
- DEWALT
- DIY
- Donson
- Enstar
- Forest
- FRONTIER
- FUJI
- Greenland
- HARDEX
- HELLO
- INGCO
- JINMA
- JOYF-AMILY
- Kelflex
- Ladder Technology
- Local
- Marksman
- Meko
- NEXUS
- NIH
- NIKI
- NISSHO
- NIYO
- PRESTAR
- PROGUARD
- ProsKit
- ROCKEY
- Rothenberger
- Scotch Brite
- Sheetrock
- SHELL
- Sin Harp
- STANLEY
- Statheros
- Sun eye
- Swelock
- SYW
- Takka
- Thing
- TOP BULL
- TOYO
- WELL MARK
- WIREMAN
- WORTH
- XR
- YATO
- ZEN
- View All
- Heat Reclaim
- Heater
- Horizontal Vertical Freezer
- INABA Installation Materials
- Inspection Equipment
- Insulation
- Lab Equipment
- Leak Stop Solution
- Lubricant Oil and Equipment
- Material Lifts
- Measurement
- Measuring Instrument
- CENTER
- TPI (Test Products International, USA)
- Bacharach (USA)
- China
- Dwyer
- Elitech
- Extech
- FLOWHOOD
- Fluke
- Foretech
- HANS
- HIOKI
- Johnson Controls (JCI)
- K1
- Kyoritsu (Japan)
- Local
- LONGRUN
- LUTRON
- Mastercool
- Neutronics
- P and M
- Panasonic
- ProsKit
- Pulsar
- Refco
- Robinair
- Sanwa (Japan)
- STANLEY
- TASCO
- TDS Testr
- TENMARS
- testo
- UNI-T
- Value
- Zeal
- View All
- Medical
- Oil Pump
- Parts, Components and Accessories
- Acson
- AIRMENDER
- ANACONDA
- AYVAZ
- Bitzer
- BLUE
- Bock
- Bristol
- Carrier
- Castel
- China
- Copeland
- Copeland Scroll
- CULMI
- Daikin
- Daikin (York)
- Danfoss
- DEWPOINT
- DJE (TAIWAN)
- DONPER
- Dunham-Bush
- EBM
- ELCO
- Emerson
- FASCO
- FRIMEC
- Fujiaire
- Fujikoki
- Fujitsu
- genteq
- GOLDEN
- GP Valve
- grefac
- HaiLin
- HELDON
- Henry
- Highside Chemicals
- Hitachi
- Honeywell
- HUB
- I-MAX
- INNERCO
- ISO
- JOHNSON CONTROLS
- KAWA
- KEMET
- KRIWAN
- Kruger
- KULTHORN KIRBY
- Local
- Magnetek
- MALLORY
- Maneurope
- Master Tool
- MIDEA
- Mitsubishi
- Mitsubishi (MELCO)
- Mitsubishi (MHI)
- NGM
- Nicotra
- Nitto
- OKM
- OMRON
- P and B
- P and M
- Packless
- Panasonic
- Refco
- RefComp
- Refworld
- REGIN
- Saginomiya
- SANHUA
- SANYO
- Secop
- SEKI
- Shimatec
- SMARTECH
- SNOWICE
- SPORLAN
- SUN EYE
- SUNWHA
- TASCO
- TECO
- Tecumseh
- TEIDAR
- TEXAS
- Topaire
- TORIN
- Toshiba
- Tozen (Japan)
- Trane
- Vibratech
- Welcold
- WELCOME
- York
- York (AP)
- York (China)
- York (JCI)
- York Malaysia
- York/McQuay
- Others
- View All
- Pressure Test Equipment and Accessories
- AFA
- BELIMO
- BLUE
- CARRIER
- China
- COOLMAX
- CULMI
- Danfoss
- DSZH
- Dwyer
- Elitech
- FIVALCO
- GM (GAS CONTROL)
- grefac
- Harris
- HELDON
- HERO
- HK INSTRUMENTS
- Honeywell
- James
- JOHNSON CONTROLS
- Local
- Master Tool
- Mastercool
- MESSER
- MUREX
- OZWELD
- P & M
- PENN
- Refco
- Refworld
- Robinair
- Rothenberger
- Sun eye
- TASCO
- Tozen (Japan)
- TS
- Value
- VESS
- Others
- View All
- Pressure Washer
- Project and Customer Reference
- Refrigerant
- Refrigerant Identifier
- Refrigerant Leak Detection System
- Refrigerant Recovery and Recycling Equipment
- Refrigeration Condensing Unit and Cooler (Blower)
- Repair
- Sealant
- SILICONE SEALANT
- Steam Cleaner
- SUN EYE
- System Flushing
- Temperature & Humidity Display / Controller
- Temperature and Humidity Display / Controller
- Temperature Display / Controller
- Tube Cleaning Equipment
- Vacuum Cleaner
- Vacuum Pump
- Valves (Water and Steam Application)
- Vibration Meter
- Others
Culmi Air-Cond & Refrigeration Parts Supply Sdn Bhd
24, Jalan Industri USJ 1/5,
Taman Perindustrian USJ 1,
47600 Subang Jaya,
Selangor, Malaysia.
+603-8024 7376
+603-8081 3378
+603-8024 7387
PACKLESS VIBRATION ABSORBER (VIBRATION HOSE)
Previous | 1 / 2 | Next |
Vibration Absorbers - Stainless Steel
- Thirteen models available to fit copper tubing from 3/8 through 3-1/8 inches O.D.
- Each unit pressure and vacuum tested, cleaned, dehydrated and sealed in plastic film
- C-UL-US Approved
Packless vibration absorbers are designed for installation in the suction and discharge lines of air conditioning and refrigeration system to dampen the transmission of compressor-induced vibration through system piping.
Packless vibration absorbers are constructed of deep pitch corrugated tubing in stainless steel for increased flexibility and vibration absorption, covered with high tensile stainless steel wire braid for superior strength. The vibration absorbers have female copper end connections for making sweat connections to refrigerant piping.
Each absorber is pressure tested then carefully vacuum tested using a highly sensitive helium mass spectrometer leak detection device. Units are cleaned, dehydrated and sealed in plastic film after final inspection to maintain cleanliness and dryness prior to installation. These are available either in bulk or individually boxed.
Packless Vibration Absorbers are compatible with all HFC, HCFC and CFC refrigerants. The stainless steel models, VAFS-3 through VAFS-11, are electrically welded with no braze joints to achieve the higher working pressures set by today’s industry standards.
Packless vibration absorbers are recognized under the component programs of Underwriter’s Laboratories, Inc., c-UL-US, File #SA2575.
Packless vibration absorbers are compatible with the following refrigerants:R12 | R22 | R23 | R125 | R134A | R401A |
R401B | R402A | R402B | R404A | R407A | R407B |
R407C | R408A | R409A | R410A | R410B | R412A |
R502 | R507 | R508 | R509 |
Type
PACKLESS VAFS-9 VIBRATION ABSORBER 1-1/8" (VIBRATION HOSE)
Vibration Absorbers - Stainless Steel (3/8 - 1-5/8)
- Eight models available to fit copper tubing from 3/8 through 1 5/8 inches O.D.
- Each unit pressure and vacuum tested, cleaned, dehydrated and sealed in plastic film
- C-ULApproved
Notes:
- Compatible with all HFC, HCFC & CFC refrigerants.
- C-UL-US recognized, file # SA-2575.
- Due to a continuous program of product improvement, specifications and dimensions are subject to change without notice.
- For unusual installations, Packless vibration absorbers can be provided in special lengths. Please consult factory with requirements.
Model Number | Actual I.D. in. | Flex Tubing I.D. A in. (mm.) | C in. (mm.) | D in. (mm.) | Max. Working Pressure psig. (bar.) | B in. (mm.) |
---|---|---|---|---|---|---|
VAFS-3 | 3/8 | 5/16 (7.9) | 6 7/16 (163.5) | 8 1/4 (210.0) | 650 (45) | 5/16 (7.9) |
VAFS-4 | 1/2 | 3/8 (9.5) | 6 11/16 (169.9) | 9 (228.6) | 650 (45) | 3/8 (9.5) |
VAFS-5 | 5/8 | 1/2 (12.7) | 7 3/16 (182.6) | 9 3/4 (247.7) | 650 (45) | 1/2 (12.7) |
VAFS-6 | 3/4 | 5/8 (15.9) | 7 7/16 (188.9) | 10 1/2 (266.7) | 650 (45) | 5/8 (15.9) |
VAFS-8 | 7/8 | 3/4 (19.0) | 8 1/8 (206.4) | 11 1/2 (292.1) | 650 (45) | 3/4 (19.0) |
VAFS-9 | 1 1/8 | 1 (25.4) | 8 7/8 (225.4) | 13 (330.2) | 650 (45) | 29/32 (23.0) |
VAFS-10 | 1 3/8 | 1 1/4 (31.8) | 10 5/8 (269.9) | 14 3/4 (374.7) | 650 (45) | 31/32 (24.6) |
VAFS-11 | 1 5/8 | 1 1/2 (38.1) | 12 1/2 (317.5) | 17 (431.8) | 650 (45) | 1-3/32 (27.8) |
Vibration Absorbers - Stainless Steel (2 1/8 - 3-1/8)
- Five models available to fit copper tubing from 2-1/8 through 3 1/8 inches O.D.
- Each unit pressure and vacuum tested, cleaned, dehydrated and sealed in plastic film
- C-UL Approved
-
Notes:
- Compatible with all HFC, HCFC & CFC refrigerants.
- C-UL-US recognized, file # SA-2575.
- Due to a continuous program of product improvement, specifications and dimensions are subject to change without notice.
- For unusual installations, Packless vibration absorbers can be provided in special lengths. Please consult factory with requirements.
In the table below, * = C-UL-US approved for low side (suction side) use only.
Model Number | Actual I.D. in. | Flex Tubing I.D. A in. (mm.) | D in. (mm.) | Max. Working Pressure psig. (bar.) | Burst Pressure psig. (bar.) |
---|---|---|---|---|---|
VAF-82 | 2-1/8 | 2 (50.8) | 20 (508.0) | 390 (27) | 1950 (134) |
VAF-83 | 2-5/8 | 2-1/2 (63.5) | 24 (609.6) | 340 (23) | 1700 (117) |
VAF-84 | 3-1/8 | 3 (76.2) | 27 (685.7) | 300 (21) | 1500 (103) |