REGIN RCF-230D WALL MOUNTED LCD ON/OFF ROOM THERMOSTAT WITH FAN SPEED CONTROL (230VAC) Fan speed max is 3Amp Room thermostat for fan-coil applications with on/off outputs. Intended to control heating and/or cooling in 2- or 4-pipe installations. Setpoint and fan speed are set using the buttons on the front. RCF-230D is a thermostat for controlling heating and/or cooling in a room via on/off outputs. It also has a function for three-speed fan control (for fan-coil). The controller uses 230 V AC supply voltage. It has triac outputs for 230 V AC heating/cooling and built-in 230 V AC fan relays, which means that a separate relay module is not required for the fan and actuators. Applications The thermostat is suitable in buildings where you want optimal comfort and reduced energy consumption, for example offices, schools, shopping centres, airports, hotels, hospitals etc. Easy to install Its modular design, featuring a separate bottom plate for wiring, makes the thermostat easy to install and commission. The bottom plate can be put into place before the electronics are installed. Mounting takes place directly on a wall or wall socket. Control function The controller controls heating and/or cooling in a room via on/off outputs. It has a settable hysteresis and the setpoint can be changed using the INCREASE ( ) and DECREASE ( ) buttons on the front. See also the section ¡±Display information and handling¡± on page 3. Built-in or external sensor The thermostat has a built-in sensor. Alternatively, the input for an external PT1000-sensor can be used. On/off control outputs RCF-230D has outputs for control of e.g. 230 V AC on/ off actuators.
read more
